How to reset MikroTik RouterBOARD 2011?
Re: How reload RB2011-2Hnd-IN?
Download latest RouterOS v6 build and network install: http://www.mikrotik.com/download.
leave Netinstall running in the background.
connect etherboot cable to ether1, hold reload button.
turn on the device, release reload button after ~10 s.
check if you can see the device in the Netinstall window.
How to reset MikroTik Hex Poe?
How reload configuration
unplug the device.
press and hold the button immediately after power is applied. Note: hold the button until the LED starts blinking.
release the button to clear the configuration.
How to reset Haplite settings?
Re: Can’t reload configuration via reload button: hAP light
unplug the USB cable to turn off the power.
hold down the RES button with the handle.
plug in the power (keep holding the button)
when the ACT LED starts flashing, release the button.
wait 15-20 seconds and the ACT LED will blink twice, which means the process is complete.
How to reset CCR?
1: Microtic CCR Hard Reload
Turn on MicroTik CCR.
click Reload button on the front.
The router will beep, release the button and wait until CCR reboot and shipped from the factory reload mode.